What: The decade long story of me trying to build a track car
If I knew then, what I know now: I would do the same damn thing
Product to check out: Strait jacket. No seriously, like for the crazies. But try to get a fire-resistant one so you can wear it on the track!
My first cool car – 1993 BMW 325i
One of the things we would like to share are some of the projects that we are working on during our own free time. I will share the tale of my track car that I am building. It starts many years ago, and actually involves several cars at this point. The story goes! In 2004, I bought a 1993 325i from a nice couple and started driving it. I was always a car guy, and was one year graduated from high school and really wanted a “cool” car. This is what I ended up with. I loved that car and drove it everywhere I could!
As the years go past, I became more of a race participant, than a fan. I started working at the track on the weekends helping people with their race cars and stuff. At the same time, I also started getting into driving as a sport more. My BMW was the perfect delivery device for an entrance into motor sports. It was a good solid car, had good power, great brakes and handling. I started to modify it for auto-cross, then eventually took the next step and started to prep it for track days. I did a few track school days and got really hooked. From then on, I was building a race car!
Transitioning from a ‘street’ car to a ‘race’ car
I stripped most of the interior out of the car to save the weight, also removing the sound deadening at the same time (which was a BIG job!). I got a fixed back racing seat, and a roll bar, some harnesses. I made it loud. Put a performance clutch and flywheel in it. Installed a shorter differential, got bigger brakes for it. And was still driving the car everyday. It was fun, but loud and uncomfortable. I loved it. I drove over 100k miles in that car while I had it, but ultimately had to sell the car just short of it being a full race car due to a crash I had while driving a fellow racers car (that will be a story for a different day!).
I made it loud. Put a performance clutch and flywheel in it. Installed a shorter differential, got bigger brakes for it. And was still driving the car everyday. It was fun, but loud and uncomfortable. I loved it.
We had gotten into Chump Car racing and had helped some people on a few events and as a result, had earned a chance to drive the car for a 36 hour race in Spokane in 2013. I had never driven at Spokane before, and was a little nervous, but was feeling OK because we were racing the same car that I drive all of the time, an E36. I was racing hard with the front runners during the race when I lost track of my internal map, and made a poor move to pass that landed me on the dirt. I lost it, and the car was wrecked. Then I had to pay for it.
Going racing always carries risk
I ended up selling my beloved 325 to a very close friend of mine. He was a fellow racer, and had been looking for a chassis to do his own build on. My car was a prime choice for him to use, and we struck a deal. I was able to recover and pay for the car I crashed by selling my race car. That was a hard lesson, but a very valuable one! I learned that your track car, can be gone in 2 seconds and there may be very little you can do about it! It took a little bit of time for me to start thinking about my 325 after selling it. But as time past, I missed it more and more.
Three years after the crash, I was able to get back into a race car again, and felt very good when doing it. I then went on the hunt for a new track car. I found a 1994 325 that had some decent prep done by a nice couple that was going to turn it into a rally car. I found it on Craigslist after they just ended up going out and finding themselves a finished Volvo rallycar to use. I bought the car, and it felt like home! I Started getting it ready to track with and found a couple of good deals online for some good used race bits. The game was on.
Getting goldie all hooked up!
There were a few things it had been prepped better and that I had not done yet on my previous 325, but was not nearly as far a long in other areas. I started to chip away at a to-do list and now it is starting to shape up nicely! This is where the story starts to get interesting. In an attempted to get the new 325 spec’d out like the old one. I struck up conversation with my friend who had bought mine before. He had not really done much with the chassis, and was maybe thinking about getting rid of the car to do something else. We talked about it a few times over the next couple of months, and eventually came to a deal for me to buy the car back from him! The idea is to get a lot of the cool or good stuff I had before swapped over to this new car since it was much more complete at this time.
Two become one
As of today, I have the two cars in the shop currently becoming one! It has been a very long process, but I am very excited to have gone full circle and have a car to use for track days and racing that I will be proud of. I like the idea of building one over buying a car. You have the chance to spend way more money doing so, but by building the car yourself, it is bespoke, and custom fit for YOU. That is what I find so great about it. The car is my version of what I think is a good way to hit the track! There is no right or wrong way, but the more miles you log, the more you will know what you want to do and do not want when you are out there! I will share more as further stages of build happen! I would say that this car is my “baby” but it will never be treated like a baby. It will be used, hard, but well cared for. This is my racing appliance! Thanks for letting me share some about my track car build, and always remember to have fun!