What: Stuff breaks when you go on track, this time – headlights and driver side mirror.
If I knew then what I know now: Consider two layers of Lamin-x on your headlights and depending on your car, have a backup set of headlights. If your OEM headlights are glass, see if there are plastic alternatives.
Check out:
- Ebay: for E30’s and many other makes and models, finding a set of used OEM parts is many times the cheapest and easiest route.
- Lamin-x: Sweet film that can protect your headlights, fog-lights, front-end and comes in pretty sweet #prospec yellow and blue tinted colors.
Reality check – stuff will break
It kind of sucks but that is a fact of the track-life. When you go on a race track, autocross course, rally stage, drag strip, etc. your car is going to be flying through the air at normally illegal speeds and changes in speed.
Bugs, rocks, small birds, rubber from tires and even parts from other cars will at some point, leave their mark on your beauty. After this most recent race weekend at Spokane County Raceways, my headlights finally bit the dust.
The fix – new (to me) headlights and new Lamin-x
Although the remaining races for the year are during the day, we are in the Pacific Northwest and that means there is always a chance for rain. When it rains, I prefer to have all the lights on, just to make sure other cars on track can see me.
To fix the headlights, at least for an E30, there are a few different options:
-
- Replace just the light bulb: These light bulbs are old school and thus the whole light bulb and actual headlamp assembly are one-piece. In most modern cars today, there is a headlamp assembly and somehow screwed to the inside, is the actual bulb. So you can replace either the headlamp assembly or the bulb but we don’t have that option here. To buy the integrated headlight, head over to Amazon and you can easily get one, like this one below (click on this link or the image below to go to Amazon and buy).
Each bulb will run you about $45/bulb. Check to make sure you are ordering the right thing – the high or low beams. They are not inter-changeable. On the plus side, there are no side dependencies. So the low or high beam bulb can fit on the left or right side of the car.
- Replace just the light bulb: These light bulbs are old school and thus the whole light bulb and actual headlamp assembly are one-piece. In most modern cars today, there is a headlamp assembly and somehow screwed to the inside, is the actual bulb. So you can replace either the headlamp assembly or the bulb but we don’t have that option here. To buy the integrated headlight, head over to Amazon and you can easily get one, like this one below (click on this link or the image below to go to Amazon and buy).
Each bulb will run you about $45/bulb. Check to make sure you are ordering the right thing – the high or low beams. They are not inter-changeable. On the plus side, there are no side dependencies. So the low or high beam bulb can fit on the left or right side of the car.-
- Replace the whole assembly: You can also choose to replace the whole assembly, which includes the bulbs and the frame that holds the bulbs in place and is screwed into the radiator support area. Normally, this is too much for broken headlights but this is where eBay is your friend. There is an option to buy brand new and even LED and projector headlight assemblies, which are awesome but pricey. Here is an option from Amazon. Beware though, these look awesome but are just as fragile as the OEM stuff. Keep that in mind before buying and taking back on track. 🙂
Ebay to the rescue
As you can see from the Amazon search results, a new, truly new and even aftermarket set of the full assembly headlights can run $200+. Instead, I went to eBay and was able to find a used set of the full headlight assembly for just over $80. This is also less money than buying new (intgrated) bulbs and the already come in the assembly. Click through the banner ad below to see search results that I used to get my new (to me) headlights.
Install in less than 5 minutes
Because I was replacing the whole assembly, all I had to do was:
- Remove 6 clips that pinch the headlight assembly to the grill that surrounds the headlights.
- Unscrew two screws for each headlight area, that holds the grill to the front area of the car.
- Unscrew two other screws that hold the headlight assembly to the radiator support.
- Disconnect the bulbs from the wiring harness.
And they’re off!
Lamin-x for extra protection
While the old bulbs were off, I cleaned off the new bulbs with generic window/glass cleaner and then installed a set of #prospec yellow tinted Lamin-x film covers. These are the same ones I had previously but this time I put them all four headlights. You can get these almost anywhere: Amazon, eBay or where I got them, ECS Tuning. These are the exact product I ordered. But since we fund this site through affiliate marketing, here is a link to Amazon, for the exact same product, of which clicking and buying helps keep this site alive.
Back to looking good for the next race!
In under 10 minutes total, including cleaning, taking pictures and moving slowly as I was recovering that day from minor surgery, old broken headlights were replaced with fresh, low cost, new (to me) headlights with extra protection from Lamin-x.
I think about headlights and even windshields as almost consumables. If I can go the rest of the year without having to replace them again, that’ll be great. But with the next race at Pacific Raceways, where there is gravel off-track and people love to drop tires, I’m not very hopeful.
