Posted on

One More Weekend, Plenty More to Learn: Haunted Horsepower at the Ridge

Silver-grey Nissan 350Z number 42 with an orange rear wheel cornering on a racetrack at the Ridge

There are worse ways to finish October than spending two consecutive weekends at the Ridge.

On October 24 and 25, Racer on Rails returned to Shelton for NASA Northwest’s Haunted Horsepower weekend. It was the closing chapter of our Pacific Northwest racing season, and we arrived with three cars, a few ideas to test, and an open mind about what we might learn.

Ron brought his number 63 Spec E46. Gama drove our number 36 Silver Bullet โ€” the numbers conveniently reversed. Joel Bergman joined us in his Nissan 350Z for his first NASA Time Trial weekend.

We also spent the weekend alongside Mario, whom we’d met at the previous event and helped get ready for this one, and Lawrence from GT Exchange, who was working toward his NASA racing license.

By Sunday afternoon, we had a new personal best to celebrate, a promising direction for our Spec E46 development, a mechanical mystery explained, and more reasons to be excited about the people joining our racing community.

Red and white BMW Spec E46 number 63 cornering on a racetrack at the Ridge
Ron’s #63 Spec E46 at speed at the Ridge. Photo: Kirk Myhre / MC Motorsport Design

NASA’s Return Brings More Ways to Get on Track

NASA โ€” the National Auto Sport Association โ€” returned to the Pacific Northwest in 2026. One of the most valuable things it brings is a connected set of opportunities for drivers at different stages.

  • Arrive for your first-ever day on a racetrack and start in HPDE1 with an instructor.
  • As your skills develop, progress through HPDE 1, 2, 3, and 4.
  • From there, drivers who want to compete can work toward Time Trial or wheel-to-wheel racing, with the training and licensing each requires.
  • Or keep enjoying driver education for its own sake. Racing doesn’t have to be the destination.

For someone looking at all the different organizations and wondering where to start, that structure helps. NASA brings instruction, advanced driving, timed competition, and racing into the same event community. This weekend gave us examples of almost that entire journey right in our own paddock.

Making the Most of a Quieter Weekend

Late October comes with some realities in Northwest racing. Budgets have been stretched over a long season. The weather is turning. Some drivers have already packed things away for winter.

The race fields were light, and we weren’t arriving with a championship to settle. We saw an opportunity to spend time testing, comparing, and developing.

Ron, Tyler, and Gama had been discussing whether lessons from our 370Z, Cayman, and other car-development work could translate to the Spec E46. Those conversations led us toward a substantially different setup direction from what we’d previously used.

Saturday’s expected dry, consistent conditions gave us a chance to evaluate it.

We didn’t know whether it would be faster. We didn’t know whether we would like it. We came prepared to drive it, listen to what the cars told us, and see where the evidence led.

The Silver Bullet Gives Us Something to Work With

Almost immediately, the Silver Bullet felt different.

The car was settled, compliant, and willing to put power down. Gama’s first impression was that it might be the most compliant Spec E46 he had ever driven.

That confidence mattered. Instead of constantly anticipating the car breaking loose, he could gradually ask more of it and explore where the limit actually was.

The lap times came into the one-minute-fifty-twos quickly. Getting into the fifty-ones took more commitment, but soon the laps were repeating: a 1:52.0, a 1:52.1, a 1:51.9, a 1:51.7.

The encouraging part was how consistently the car allowed that pace.

There was still work to do. Gama felt there was more time available in the braking and corner-entry phases, and more to explore through small setup changes. This was an initial day of testing, with room left to refine both the car and the driving.

We’ll keep the technical details in our notebook. What we can share is that we left Saturday with a clear reason to keep pursuing this direction.

View from inside a race garage looking out at a wet paddock, with the roof of a race car in the foreground
The #36 Silver Bullet in the garage at the Ridge.

Two Similar Setups, Two Different Experiences

Ron felt an improvement in his car, too. But his feedback included something Gama wasn’t experiencing in the Silver Bullet.

His number 63 remained edgy, especially under power. It felt more compliant than before, but it still wanted to step out. He couldn’t lean on it with the same confidence.

For Saturday’s final race, we swapped cars.

Gama drove Ron’s car, and Ron drove the Silver Bullet. That gave both drivers a direct comparison and helped us separate what was specific to the car from what might have been a difference in driving.

Gama came back with a similar assessment to Ron’s. The car was moving in the same general direction, but it didn’t fully settle. There was still an underlying nervousness.

The intended setups were the same. The experience behind the wheel wasn’t.

Sunday morning, Jordan found a significant clue while preparing the cars: a front sway-bar mounting component on Ron’s car had failed, leaving the bar connected at only one end.

That gave us a mechanical explanation consistent with the feedback. We couldn’t say precisely when the failure occurred, but we could say that Ron had identified a real difference, the car swap had reinforced it, and the inspection had uncovered a problem.

That’s a valuable development process: listen to the driver, compare carefully, and investigate.

Wet-Weather Learning โ€” and Choosing the Best Seat Time

Sunday brought rain and a different assignment.

For the first wet race, Gama returned to the Silver Bullet and Ron drove his own car. Gama used his pace to give Ron a moving reference, watching the gap and increasing speed as Ron gained confidence.

Ron responded. He adapted, found speed, and at points maintained the gap even with the unresolved issue affecting his car.

For the final race, we decided the most useful thing we could do was give Ron the Silver Bullet.

That put him in a car we knew was behaving predictably, so he could concentrate on his wet driving without the sway-bar problem complicating every sensation and every piece of feedback.

Gama stepped out, and Ron took the seat.

With limited track time left in the season, that was where we felt it could provide the most value.

Joel’s 350Z: Preparing the Car for the Driver’s Next Step

Joel came into the weekend having already made significant progress in his 350Z.

Most of his recent experience had been with OnGrid, including timed competition. He was still building his fundamentals, but the development since earlier in the year had been substantial.

The Ridge is the track he knows best. When we saw another Time Trial opportunity there, with lighter attendance and the prospect of plenty of track time, Gama encouraged him to come out.

Joel jumped on it.

Before the weekend, though, we had a problem to address.

At his previous event, we had been managing brake heat and damaged caliper seals. Refurbished replacement calipers of the same general type hadn’t solved the underlying limitation.

Fortunately, our 370Z development had left us with some useful hardware. After Gama’s T3 car moved to Paragon six-piston calipers, its former Akebono calipers became available. Gama gave those to Joel, along with spare Paragon two-piece rotors.

Combined with fresh brake consumables and ducting, that gave Joel an upgraded front braking package.

Across two days of driving, we monitored the temperatures and were pleased with the results. The brakes delivered strong, consistent performance throughout the event.

That meant Joel could focus on driving.

An Early Mistake, Then a Deliberate Reset

Saturday didn’t begin exactly as Joel hoped.

On his first flying lap, a little too much enthusiasm at the carousel sent him wide, with a tire dropping into the dirt. He checked in with the Time Trial group leader, and the opening session passed without a useful flying lap.

He reset.

Between sessions, Joel reviewed his previous onboard laps and spent time visualizing what he wanted to do. We revisited the priorities from his last visit: finding the apex with his eyes, getting the car pointed, and coordinating throttle application with the release of steering angle.

The goal was to feel how those inputs worked together โ€” to add power with intention, understand the car’s response, and manage the exit rather than hesitate through it.

His second session produced a small improvement.

The third brought a more significant step, into the low one-minute-fifty-fives and toward the fifty-fours. Traffic made it difficult to repeat the best laps, but the potential was there.

For his final session, the assignment was to put it together consistently.

He did.

In the clear laps near the end of that session, Joel repeatedly ran in the one-minute-fifty-fours. By our count, five of his final seven laps were in that range.

He finished with a personal best of 1:54.32 โ€” approximately a second and a half faster than his August best.

That’s a substantial improvement. Just as satisfying was watching him back it up with multiple laps at a similar pace.

His theoretical best, combining his strongest sectors, was down in the low one-minute-fifty-threes. Sunday’s rain meant we didn’t get another dry day to see whether he could connect those pieces, but he left with a clear opportunity to pursue next time.

A mistake in the first session became a small part of a much better story: regrouping, applying a plan, and developing speed he could repeat.

Silver-grey Nissan 350Z number 42 with an orange rear wheel cornering on a racetrack at the Ridge
Joel’s 350Z at the Ridge. Photo: Kirk Myhre / MC Motorsport Design

A Thank-You to NASA Northwest for Opening the Door

Lawrence’s weekend highlighted another reason we appreciate having NASA Northwest here.

He already had considerable track-day and time-attack experience, with serious speed in his Porsche GT3 Cup. He wanted to take the next step into wheel-to-wheel racing, including opportunities with the new Washington Enduro Cup.

But by late October, finding an available competition school was becoming difficult.

Being fast is one part of the preparation. Racing alongside other cars requires its own skills, judgment, and training, and Lawrence needed an opportunity to complete that work.

Gama connected him with Jason Perry, knowing NASA Northwest could accommodate individual competition-school instruction during race weekends.

Jason and Danielle Perry helped put a plan together. Lawrence completed the competition coursework over the weekend and participated in races, including some excellent, respectful battles with Mario.

A huge thank-you to Jason, Danielle, and the NASA Northwest crew for their flexibility and effort.

They helped an experienced driver find a practical path through the required training and onto the grid before the season ended. Growing motorsports takes people willing to make those opportunities possible.

Yellow Porsche GT3 Cup race car at speed on a wet racetrack at the Ridge
Lawrence’s GT3 Cup at speed at the Ridge. Photo: Charlie.
Charlie capturing Lawrence’s GT3 Cup from the fence. Video: Meta Ray-Bans.

That weekend was also Charlie’s first race weekend with us โ€” days at the track, nights in the RV, and a game night playing Minecraft Dungeons 2.

Looking Ahead With the Spec E46 Community

We also left the Ridge feeling grateful for the Spec E46 community and excited about what comes next.

The development work was encouraging, but the level of driving deserves recognition, too. The pace we’re seeing from Ron and several other drivers is the kind that puts people in contention for podiums and race wins.

Over the past several years, and especially this season, we’ve watched drivers become faster, more consistent, and better able to explain what they feel and act on what they learn.

That progress takes effort. It comes from reviewing laps, asking questions, trying something different, and showing up ready to work again.

Getting to be part of that process is one of the most rewarding things we do.

There are also more people interested in joining the class.

We enjoyed spending time with Mark and hearing about his interest in purchasing a Spec E46. A friend of his, racing an S2000 that weekend, was also considering the move. A longtime track driver and Honda enthusiast, he was drawn to a spec class because he wanted to focus on developing his driving through close competition.

We love hearing that.

Looking toward next year, we have drivers interested in continuing to compete here in the Northwest and traveling to California and other West Coast tracks. There are new challenges to take on and more opportunities to learn from one another.

Thank you to everyone who has raced with us, trusted us with their cars and development, shared feedback, or stopped by the paddock to talk about getting started.

Thank you to Tyler, Jordan, and the crew for the preparation, coaching, and problem-solving that made this weekend productive. And thank you to the organizers, instructors, volunteers, and workers who gave us one more opportunity to get on track.

We came to the Ridge ready to experiment.

We left with a faster Joel, a promising direction for our Spec E46s, valuable lessons from Ron’s feedback, and more people taking steps toward the racing they want to do.

That’s a pretty good way to finish a season.

Posted on

Racing for Linda: IRDC’s Blackburn Memorial Invitational at the Ridge

Gama in Racer on Rails' #109 Cayman GT4 MR battling Michael Conatore's #19 Porsche 997 GT3 Cup car at The Ridge.

IRDCโ€™s Linda Blackburn Memorial Invitational | October 17โ€“18, 2026 | The Ridge Motorsports Park

Gama in Racer on Rails' #109 Cayman GT4 MR battling Michael Conatore's #19 Porsche 997 GT3 Cup car at The Ridge.
Gama in Racer on Rails’ #109 Cayman GT4 MR battling Michael Conatore’s #19 Porsche 997 GT3 Cup car at The Ridge. Photo: Peng Du.

October racing in the Pacific Northwest is a gamble.

By the middle of the month, summer is usually a distant memory. Rain becomes increasingly likely, temperatures drop, race cars start getting winterized, and drivers suddenly remember all the things they promised their families theyโ€™d do once racing season ended.

So when the International Race Drivers Club (IRDC) decided to add a brand-new October race weekend at The Ridge Motorsports Park, there was some risk involved. But there was also a really good reason to try.

The Linda Blackburn Memorial Invitational, held October 17โ€“18, was a new non-championship event sanctioned by ICSCC, with Friday testing hosted by our friends at Turn 2 Lapping. It gave Northwest racers one more opportunity to get on track, helped build momentum for the newly established Porsche & Ginetta Cup, and brought the club together for something it hadnโ€™t done since before COVID: an IRDC year-end banquet.

And the weather? Well, we got lucky. After a damp start to Saturday, beautiful fall sunshine and cool temperatures gave us plenty of opportunities to make race cars go fast.

For Racer on Rails, we arrived with three cars, some new hardware to test, a new-to-us Porsche Cayman GT4 MR, and a whole bunch of reasons to be excited about whatโ€™s ahead.

Remembering Linda Blackburn

Before getting into the racing, we need to talk about the person this weekend was named for. If youโ€™ve been around Conference racing for any meaningful amount of time, you know that the people who make our sport happen arenโ€™t just the people sitting behind steering wheels.

Linda Blackburn was one of those people who helped make everything possible. Iโ€™ve been involved in Conference racing for somewhere around 15 years, and for as long as I can remember, Linda was simply always there.

She spent many years volunteering with Cascade Sports Car Club and the broader Conference community, helping with registration, timing and scoring, club administration, and the countless other responsibilities involved in putting on amateur road racing events. Her contributions stretched back many years, including receiving Cascadeโ€™s Outstanding Membership award in 2012.

Linda passed away in 2025, leaving behind a remarkable legacy of service to Northwest motorsports. What I particularly appreciate about naming this event after her is that it celebrates the work of somebody who spent so much of her life helping other people enjoy the sport.

We racers tend to measure our weekends in lap times, positions, and trophies. But none of that happens without the people handling registration, waving flags, managing timing and scoring, staffing race control, organizing the paddock, and doing all the work behind the scenes.

Thanks, Linda. And thanks to everyone who continues that tradition.

A New Porsche Chapter for Racer on Rails

One of our biggest objectives for the weekend was to shake down our newest addition to the Racer on Rails fleet: a 2020 Porsche Cayman GT4 Clubsport MR, carrying number 109.

Earlier this year, we sold the Cayman GT4 Clubsport Track Day Edition that had been part of our program for the past few years. Weโ€™d purchased that car after it had been damaged, brought it back to life, developed it further, and enjoyed a whole lot of driving and racing with it. The #109 represents the next chapter in that journey.

Weโ€™re making a bigger investment in Porsche performance and driver development at Racer on Rails, and part of that means having the right equipment to support the programs we want to build.

For this car, the initial objective was straightforward: complete our post-purchase inspections, bring the maintenance current, address anything requiring attention, and get it onto the racetrack to validate that everything was functioning properly.

Longer term, the #109 is intended to become an important training and development platform for our drivers. We also want to have it on the grid throughout the 2027 Porsche & Ginetta Cup season, helping support the growth of that new series. But before we could start inviting other people to drive it, we needed to make sure we understood the car ourselves.

And, naturally, there was already a small adventure involved.

When we received the GT4, its steering wheel was missing two buttons needed to operate the car properly. Through our friends at Avants, we were connected with Paul, another Cayman GT4 MR owner, who was incredibly gracious in allowing us to borrow his steering wheel so we could validate the car and get it ready for the weekend.

Thatโ€™s no small favor when youโ€™re talking about specialized Porsche motorsport equipment. Paul, seriously, thank you! We couldnโ€™t have done this weekend without your help, and weโ€™re looking forward to returning the favor with simulator coaching with Tyler and some time together at the track.

Itโ€™s another example of something I love about the motorsports community. A shared passion for these machines has a funny way of turning strangers into people who are willing to help each other out.

Getting acquainted with the #109 GT4 MR during its first race weekend with Racer on Rails.
Getting acquainted with the #109 GT4 MR during its first race weekend with Racer on Rails. Photo: Peng Du.

Dirkโ€™s Cayman: One Limitation at a Time

Joining us for Friday testing was my good friend and RoR driver Dirk Groeneveld, back in his 2010 Porsche Cayman Base that weโ€™ve been developing for SCCA Touring 3 competition.

Weโ€™ve already gotten several test days and a full race weekend under our belts with this car, and itโ€™s become a really fun engineering and driver development project.

One of the principles weโ€™ve been trying to follow is that rather than immediately throwing the entire Porsche performance parts catalog at the car, we want to understand its limitations and address them methodically. Identify the current constraint, make a thoughtful change, validate the result, and then move on to the next opportunity.

At our previous weekend at The Ridge, weโ€™d established that the first major limitation was the braking system, particularly the thermal performance and longevity of the factory rotors.

For this event, we installed DBA one-piece slotted brake rotors and fresh pads. Based on our prior experience with DBA products, we thought they might offer a meaningful improvement without immediately requiring expensive two-piece racing rotors or a complete brake system overhaul.

We also have additional brake cooling and PDK cooling upgrades in the works, but some of those parts didnโ€™t arrive in time. Thatโ€™s okay. We still had plenty to test.

Friday went really well. Dirk was running on used Hoosier tires and was already back into the low-1:50 range, continuing to build confidence and familiarity with a car that is proving to be seriously quick for its class.

Dirk and Tim lined up for Friday testing. Two drivers, two very different race cars, and another opportunity to work on their craft.
Dirk and Tim lined up for Friday testing. Two drivers, two very different race cars, and another opportunity to work on their craft. Photo: Gama Aguilar / Racer on Rails.

Equally important, Dirk was spending time between sessions reviewing data, evaluating his driving, and helping us understand how the car was responding.

Dirk reviewing session data between runs. Every session is another chance to understand the car, refine the driving, and build speed.
Dirk reviewing session data between runs. Every session is another chance to understand the car, refine the driving, and build speed. Photo: Gama Aguilar / Racer on Rails.

This was exactly the kind of Friday we wanted. Good pace, useful feedback, and more information to guide the next round of development. With Dirk looking toward a national SCCA Touring 3 program in 2027, every weekend like this helps us prepare both the driver and the car for whatโ€™s ahead.

Then Saturday morning happened.

A Coolant Line, a Deadline, and a Different Porsche

Saturday began with damp conditions for the first Porsche & Ginetta qualifying session. Dirk went out in his T3 Cayman, but with the track still transitioning from wet to dry, it wasnโ€™t really a session for chasing outright pace.

Later that morning, Dirk completed his other qualifying session with an official best lap of 1:50.617. Unfortunately, when he returned to the paddock, the Cayman was losing coolant.

We traced the problem to a small cut in one of the coolant hoses. Thankfully, he made it back before the car overheated, but we now had a repair to manage and an approaching race start.

Renรฉ and Bryce jumped on it, and we were able to source a replacement hose. Unfortunately, replacing the failed component is only part of the adventure on a mid-engine Porsche. The engine lives in the back, the radiators live in the front, and coolant travels through lines running nearly the entire length of the car. Thatโ€™s a lot of opportunity for trapped air, and properly bleeding the system can be frustratingly time-consuming.

We established a deadline: if we couldnโ€™t get the car fully repaired, bled, and confidently ready with enough time before Dirkโ€™s next race, we werenโ€™t going to rush it.

One of my principles when weโ€™re supporting drivers at the track is that our customers arenโ€™t spending all this time and money to watch their cars sit on jack stands. Theyโ€™re coming to have a driving experience.

Of course, mechanical failures are part of motorsport, and we canโ€™t always prevent them. But when we have an appropriate alternative available, and weโ€™re working with an experienced driver we trust, Iโ€™d rather find a way to keep that person driving.

Dirk certainly qualified. Heโ€™s also one of my best friends. So when it became clear that his T3 Cayman wasnโ€™t going to make the race, I offered him the keys to our new #109 GT4 MR.

The only wrinkle? Dirk had never driven the car at full throttle. In fact, the very first time he got to experience full throttle in the GT4 MR was when the green flag dropped for his first race.

๐Ÿคฃ Welcome to motorsport!

Bryce helping Dirk get situated in the #109 GT4 MR. Sometimes the best way to save a race weekend is to find another car to race.
Bryce helping Dirk get situated in the #109 GT4 MR. Sometimes the best way to save a race weekend is to find another car to race. Photo: Peng Du.

To Dirkโ€™s credit, he approached the whole thing exactly as an experienced driver should. He was conservative initially, spent time understanding the brakes and power delivery, gradually built confidence, and avoided asking more of the car than he understood.

In his first Porsche & Ginetta Cup race, Dirk finished sixth in the Porsche class, recording a best lap of 1:45.772. Thatโ€™s a pretty respectable introduction to a car heโ€™d never driven at speed!

Then he went out again in Group C, this time competing in the ST class. He brought home the class win and dropped his best lap to 1:45.193. Thatโ€™s more than half a second faster than his first race, while still learning an unfamiliar race car.

It wasnโ€™t the weekend weโ€™d planned, but Dirk got to race, we collected some excellent shakedown experience with the #109, and we all learned a little more about the car. Thatโ€™s a pretty good recovery from a failed coolant hose.

Beyond the racing, one of my favorite parts of sharing these weekends with Dirk is simply getting to spend time together. We usually sneak away for dinner, reconnect as friends, and talk about our families, businesses, life, and whatever else is happening outside the paddock.

Those conversations have become an important part of our race weekends together. Dirk had family commitments that kept him away Sunday, but Iโ€™m glad we were able to make his Friday and Saturday memorable.

Silver Bullet Returns, and Anthony Raises the Bar

Our other car for the weekend was the #86 Spec E46, affectionately known as Silver Bullet, with longtime friend and RoR driver Tim Wisner behind the wheel.

Silver Bullet had recently received a fresh engine after a failure during our previous race weekend at The Ridge. Weโ€™d also taken the opportunity to refresh the car, so this weekend was a chance to validate the work and get it back into competition.

Friday went well, with Tim quickly finding his rhythm and getting down into the high-1:51 to low-1:52 range. Because of family obligations, Tim wasnโ€™t able to participate on Saturday. Under the eventโ€™s race format, that meant starting from the back when he returned Sunday.

Tim came back ready to go and put together a pair of excellent Spec E46 races. He worked his way forward, finished third in class in both races, and had some particularly entertaining battles with Pete Bristow, someone heโ€™s raced hard with before.

And the results show just how close those battles were. In Sundayโ€™s first Spec E46 race, Tim finished 0.485 seconds behind Pete. In the afternoon race, the gap was even smaller at 0.430 seconds. Less than half a second separating the two drivers at the finish, twice in one day!

Considering this was only Timโ€™s second race weekend of 2026, with his previous outing back in June at Oregon Raceway Park, thatโ€™s some really excellent driving. He also participated in the SPM race group, adding more racing experience to an already busy Sunday.

But there was somebody else in the Spec E46 field who has been raising the standard all season: Anthony Lo. What a year this guy has had.

Weโ€™ve talked about Anthonyโ€™s development in previous race reports, and itโ€™s been incredibly rewarding watching him continue to elevate his driving across Pacific Raceways, Portland International Raceway, Spokane, and The Ridge.

At this event, Anthony won both of Sundayโ€™s Spec E46 races, turning fastest laps of 1:50.623 and 1:50.766. Those are seriously quick times for a Spec E46, and the most impressive part is that his performance isnโ€™t confined to a single circuit or one good weekend.

Heโ€™s developed into a consistently fast, highly capable racing driver. And now we can officially celebrate something even bigger.

Anthony Lo is the 2026 ICSCC Spec E46 Champion!

He finished the championship with 261 points, having moved from fifth place in 2025 to the top of the standings this season. That also means Racer on Rails drivers have now won the Spec E46 championship two years in a row, following Robin Adrianseโ€™s 2025 title.

Thatโ€™s whatโ€™s up!!! ๐Ÿ†

Tim Wisner and Anthony Lo after Sunday's racing. Great performances from both drivers, and a reminder that the relationships are every bit as important as the competition.
Tim Wisner and Anthony Lo after Sunday’s racing. Great performances from both drivers, and a reminder that the relationships are every bit as important as the competition. Photo: Gama Aguilar / Racer on Rails.

Weโ€™re incredibly proud of both drivers, and even more excited about what this says about the potential of the Spec E46 community.

The field at this October invitational was relatively small, but thatโ€™s not particularly surprising for a late-season non-points weekend. Looking toward 2027, weโ€™re optimistic about the continued growth of Spec E46 in the Northwest, and we think thereโ€™s a realistic opportunity to see average grids in the neighborhood of 12 to 15 cars.

That would make for some really excellent racing, especially when youโ€™ve got drivers like Anthony setting the benchmark and motivating everyone else to continue getting better.

The Porsche & Ginetta Cup Is Finding Its Feet

One of the biggest motivations for IRDC to add this October event was to create a second race weekend for the newly established Porsche & Ginetta Cup.

Steve and Rebecca have been championing the concept, with the goal of creating a dedicated place for Porsche and Ginetta owners to enjoy competitive wheel-to-wheel racing in an environment that puts a high priority on safety, respect, and having fun.

The series had only made its debut in August, but here we were two months later with 13 starters in Saturdayโ€™s first race, including eight Porsches and five Ginettas. Thatโ€™s a pretty encouraging start, especially considering the event was being held in October, long after many people have already wrapped up their racing seasons.

Iโ€™m particularly excited about the opportunity this creates for owners of factory-built Porsche race cars. There are plenty of Cup cars, GT4s, and other amazing Porsche race cars around the Northwest, and Iโ€™d love to see more of them coming out to do what they were designed to do: race! Not just sit in garages, get polished, or show up for the occasional lapping day.

And the philosophy behind the series is one that I strongly support: race hard, give each other room, avoid contact, and have a great time doing it. I got to experience exactly what that kind of racing can look like on Sunday.

Porsches making their way up the hill at The Ridge during the Linda Blackburn Memorial Invitational.
Porsches making their way up the hill at The Ridge during the Linda Blackburn Memorial Invitational. Photo: Karl Noakes.

An Epic Battle with Michael Conatore

For Sundayโ€™s races I was back in the #109 GT4 MR, and one of the drivers I ended up racing against was Michael Conatore, driving his #19 Porsche 997 GT3 Cup car.

We had a really entertaining mismatch between the two cars. Michael was on full racing Michelin slicks, while I was running Toyoโ€™s new Proxes R tire, its DOT racing tire that replaces the Proxes RR. The Toyo is a perfectly serviceable racing tire, but it certainly isnโ€™t a Michelin slick. And it was fascinating seeing how those differences played out around The Ridge.

Our GT4 MR was excellent through the medium- and high-speed sections, particularly Turns 1 and 2 and the transition toward Turn 3. The car felt composed and capable, and I could create some breathing room in those sections. But once we moved into the slower, more mechanically grip-dependent corners, Michaelโ€™s tire advantage really started to show itself.

In our first race, I got a great start and was able to put a few seconds between myself and the cars behind me while they battled among themselves. Eventually, Michael worked his way clear of that group. Then suddenly there he was in my mirrors, and he stayed there.

For lap after lap, I was working to protect the inside when necessary, maximize the GT4โ€™s strengths through the faster sections, and avoid giving him an easy opportunity to use his superior mechanical grip to get alongside me. It was an absolutely fantastic race.

The deciding moment came on the final lap as we approached the Carousel. Iโ€™d been protecting the inside, and Michael finally decided to take a shot around the outside. He carried enough momentum to establish overlap, and as we approached the exit, I made sure to leave him room.

That put him on the inside heading toward Turns 8A and 8B. At that point, my tires were pretty well used up and I was struggling to put the power down cleanly. I could have continued fighting for the position, but I decided heโ€™d earned the opportunity and there was no reason to turn an excellent race into an unnecessarily risky one.

Michael completed the pass, and we finished the race. The official timing sheets show Michael finishing fourth in the Porsche class, with me in fifth, just 1.150 seconds behind him after 15 laps. I recorded a best lap of 1:44.423, while Michaelโ€™s best was 1:43.456.

But the lap times and finishing positions donโ€™t really capture just how much fun that race was. Afterward, it was handshakes, hugs, high-fives, and big smiles.

Thatโ€™s exactly the kind of racing we want. Weโ€™d pushed each other hard, spent lap after lap trying to find an advantage, and both brought our cars home without contact.

The #109 Cayman GT4 MR leading Michael Conatore's #19 Porsche 997 GT3 Cup car during Sunday's racing.
The #109 Cayman GT4 MR leading Michael Conatore’s #19 Porsche 997 GT3 Cup car during Sunday’s racing. Photo: Peng Du.

In our other Sunday race, the positions were reversed. Michael got ahead early, and I spent most of the race chasing him. I could close the gap through the faster corners and sometimes get right up to him approaching Turns 1 and 2, but by the time we reached the slower sections, heโ€™d use that grip advantage to create just enough separation that I couldnโ€™t put together a clean pass.

We finished fifth and sixth in the Porsche class, respectively, with only 2.749 seconds separating us after 12 laps. Michaelโ€™s fastest lap was 1:44.481, compared with my 1:45.072. And I had just as much fun.

We learned a lot about how the GT4 MR behaves, its strengths and limitations, and what we might want to focus on as we continue developing the car for ourselves and our future drivers. Perhaps most importantly, we confirmed that we have a functional, capable Porsche race car thatโ€™s ready to become part of the Racer on Rails program.

A Healthy Paddock and a Club Coming Together

The Porsche & Ginetta Cup wasnโ€™t the only part of the weekend that had me excited about the future of Northwest motorsports.

The relatively new Rush SR class was represented by a handful of cars, and itโ€™s been fun to watch that community get established. The cars look like an absolute blast, and hopefully weโ€™ll see more of them on the grid next season.

Meanwhile, PRO3 was doing what PRO3 has been doing exceptionally well for years: bringing a healthy field of cars together for competitive, accessible racing. Even this late in the season, they had a strong turnout and plenty of great battles.

And then there was Spec E46, still growing, developing its drivers, and building toward what we hope will be another exciting season in 2027.

I find it encouraging to see these different racing communities developing alongside each other. There doesnโ€™t need to be one universal answer for what somebody should race. Some people love the simplicity of a lightweight purpose-built race car. Others love the familiarity and accessibility of a production-based BMW. Some want to drive a factory-built Porsche Cup car.

All of those are legitimate paths into the sport, and the more opportunities people have to find the right one for themselves, the healthier our community becomes.

But there was another particularly cool part of the weekend that had absolutely nothing to do with lap times. IRDC held its first club banquet since before COVID.

On Saturday evening, we gathered in the event space at The Ridge, shared a meal, caught up with friends, and celebrated several club members who had made important contributions throughout the year. It was great to see everyone together in a setting where nobody was worrying about their next qualifying session or whether their car would be ready to go back out.

Iโ€™ve been involved with IRDC for a long time, including serving as the clubโ€™s president for a couple of years, and getting back to these kinds of club gatherings is something I think matters quite a bit.

The relationships we build through this sport extend far beyond the racetrack. Having the opportunity to recognize people for their efforts, reconnect with friends, and simply enjoy being together helps remind us that weโ€™re part of something larger than our own race programs.

It also felt especially appropriate during a weekend dedicated to someone who had spent so much of her life supporting this same community.

One More Weekend

When Steve, Rebecca, and the rest of IRDC decided to add another October race weekend, there was no guarantee that enough people would show up to make it worthwhile. The weather could have been terrible. Drivers could have decided their seasons were finished. Race cars could have stayed parked.

Instead, we got a beautiful October weekend full of great racing, driver development, mechanical challenges, new friendships, old friendships, and some pretty memorable experiences.

For Racer on Rails, we validated our new GT4 MR, continued learning about Dirkโ€™s Touring 3 Cayman, got Silver Bullet back on track with Tim, celebrated Anthonyโ€™s championship, and had some fantastic wheel-to-wheel racing.

The Porsche & Ginetta Cup took another step toward becoming an established part of the Northwest racing calendar. PRO3 showed up in force, Rush SR continued building momentum, and Spec E46 gave us plenty to be excited about for next year.

We also had the opportunity to spend time with friends, enjoy the club banquet, and recognize some of the people whose dedication keeps amateur racing alive. And that brings us back to Linda Blackburn, because ultimately, thatโ€™s what people like Linda spend so much of their lives making possible.

The cars are the tools. Driving is the craft. But the experiences and the people are the point.

October racing in the Pacific Northwest might be a gamble. Iโ€™m really glad IRDC took it, and Iโ€™m already looking forward to doing it again next year.

Thank you to IRDC, Turn 2 Lapping, all the volunteers, our customers and friends, and everyone who made the Linda Blackburn Memorial Invitational possible.

See you at the track! ๐Ÿ

Photography by Peng Du, Karl Noakes, and Racer on Rails.

Official results and timing

October 17: Qualifying ยท Race results ยท Lap times.
October 18: Qualifying ยท Race results ยท Lap times.
ICSCC Spec E46 standings: 2026 and 2025.

Posted on

Progress Looks Different for Everyone – IRDC Tribute to the Volunteers 2026

Dirk Groeneveld driving the white #136 2010 Porsche Cayman Base Touring 3 race car at The Ridge Motorsports Park.

IRDCโ€™s Tribute to the Volunteers at The Ridge August 2026

A weekend of new baselines, mechanical problem-solving, family racing, an almost-first win, a new T3 Cayman coming alive, and one final lap we didnโ€™t know was a goodbye.

IRDC Tribute to the Volunteers at The Ridge Motorsports Park, August 15โ€“16, 2026.

First, a tribute where it belongs

Before the drivers, the lap times, the setup changes, or the mechanical drama, this weekend belongs to the volunteers.

IRDCโ€™s Tribute to the Volunteers weekend at The Ridge Motorsports Park is named for the people who make club racing possible: corner workers, grid, timing and scoring, tech, registration, safety crews, stewards, and everyone else who gives up a weekend so the rest of us can go racing. There is no green flag without them, and there are no stories like the ones below without them either. Thank you!!

The weekend also had a little extra energy this year. The Conference calendar is different enough that this wasnโ€™t quite the usual end-of-season punctuation mark, and IRDC used the weekend to debut a new Porsche & Ginetta Cup concept. More than a dozen Porsches and Ginettas took the green on Sunday, which made for a pretty remarkable first outing for something that had come together on a very short runway.

For Racer on Rails, though, the biggest theme of the weekend was something we talk about constantly: development does not look the same for every driver. Sometimes progress is a faster lap. Sometimes it is doing the same lap over and over. Sometimes it is learning to race at the front. Sometimes it is keeping a difficult weekend from unraveling. Sometimes it is simply remembering why you love driving the car in the first place.

We got a little bit of all of it.

Matt Apeland: first make it repeatable

Matt Apelandโ€™s #54 Spec E46 at The Ridge.

Matt Apelandโ€™s #54 Spec E46 at The Ridge.

Matt came into the weekend still early in his racing journey and excited after a strong previous outing with us. He now has a properly developed Spec E46 underneath him, which means the biggest opportunity is increasingly the same one every driver eventually confronts: turning isolated good moments into a repeatable process.

Friday gave us the baseline. Matt could produce a good lap, but the spread between laps was still too wide. So the assignment for Saturday was deliberately boring: consistency.

Before we can ask a driver to change one braking point, one turn-in, or one throttle application, we need confidence that the rest of the lap will stay reasonably constant. Otherwise you are changing five variables at once and trying to learn from static.

We went deep on that idea with Matt, including one of the exercises Gama used when he was first learning: sit in the race car, watch onboard video from a faster driver, and physically mimic the steering, shifts, brake release, and throttle application. Not because the motions need to be copied robotically, but because repetition starts teaching the body what a lap is supposed to feel like.

Matt committed to it. By Sunday, the stopwatch started reflecting the change. He got into the 1:57s, including an official 1:57.820, and more importantly began backing the pace up with a string of laps in the 1:58s rather than one lonely hero lap surrounded by much larger swings.

When he climbed out and saw what he had done, his summary was better than anything we could write for him: โ€œIโ€™m a believer. The process works.โ€

That was the win.

Montey Mathison: earn the pace twice

Montey Mathisonโ€™s #147 Spec E46.

Montey is 18 and has been building real momentum this season. Over the previous couple of weekends he had started closing the gap to some of our quickest Spec E46 drivers, so he arrived at The Ridge with confidence and, naturally, expectations.

Then Friday handed him a car that simply would not make the power it should.

We worked through the usual suspects until the trail finally led to the ECU connection, where we found corrosion. Swapping in our spare ECU brought the car back to life. It cost Montey track time, but once the problem was solved he did exactly what we wanted to see: he reset, got back to work, and returned to pace.

Sunday qualifying produced a 1:52.565, and he finished third in Spec E46 with a 1:52.975 best race lap. Those numbers put him right back in the conversation with the front half of our group after spending a meaningful chunk of the weekend troubleshooting instead of driving.

That is a different kind of development. The fast lap matters. So does the ability to have the weekend go sideways, get the car back, and immediately resume the work.

Ron Tanemura: the weekend kept trying to stop him

Ron Tanemuraโ€™s #63 Spec E46.

Ron was quick essentially from the moment the weekend started. On Friday we could see that he had the pace to run near the front of the Spec E46 field.

Naturally, that is when the shifter selector rod decided to leave the chat.

The CAE shifterโ€™s selector rod came apart late in the test day and left Ron without a way to select gears. We overnighted a replacement. It arrived too short. So on Saturday morning Renรฉ made the run back to the shop for Silver Bullet, our E36, so Ron could keep racing.

Then Silver Bullet developed an electrical problem and shut off late in Saturdayโ€™s race.

Race cars have timing.

The good news was that by then we had sourced the correct selector rod for Ronโ€™s own Spec E46. Sunday he was back in the #63, qualified fourth in class, and raced his way to second place, finishing just 0.641 seconds behind the winner. There were still learning moments, including an ambitious move that cost him momentum, but that is exactly the point. He was racing in the part of the field where those decisions matter.

The part that stuck with us most did not come from the timing sheet. Multiple people independently came up during the weekend to tell us how impressed they were with Ronโ€™s development. They have watched him try different cars, put in the work, take coaching seriously, and keep showing up. Now they are watching the pace and racecraft arrive with it.

Respect in a paddock is difficult to shortcut. Ron has earned his.

Anthony Lo: the result hurt. The driving didnโ€™t.

We were not providing Anthonyโ€™s trackside support this weekend, but he is absolutely a Racer on Rails driver, and we need to pause here for a massive shoutout.

Anthony qualified second in Spec E46 with a 1:52.098. In the race he ran a 1:51.459, the fastest Spec E46 lap of the race, and put himself in position to take his first class win.

Then, on the final corner of the final lap, contact sent him around and the result disappeared.

That part is brutal. Racing can be brutally literal about where you cross the line, even when that line does a terrible job of describing how you drove.

Anthonyโ€™s result was disappointing. His performance was anything but.

He showed that he now has the pace to race at the very front, the composure to stay there, and the speed to win. The first victory will matter when it comes, but this weekend showed that the capability has already arrived.

Dirk Groeneveld: the T3 Cayman comes alive

Dirk Groeneveldโ€™s 2010 Porsche Cayman Base, now developed as an SCCA Touring 3 car.

Dirkโ€™s weekend was a milestone for both driver and car: the first official race weekend for his 2010 Porsche Cayman Base that we have been developing into an SCCA Touring 3 car.

The previous test days had been productive but each uncovered another small issue to solve. The biggest lingering problem was an intermittent power cut that appeared to be torque limiting when the car moved outside the operating assumptions Porsche built into a street car. Before this weekend we updated the tune, put fresh tires on the car, and moved to a staggered tire setup.

Friday was the first time everything simply worked.

Dirk initially came back describing the car as if he were still wrestling with it. Then we asked the obvious question: what are the lap times?

Low 1:50s. Then the 1:49s.

That changed the conversation. The Cayman was already seriously quick, and Dirk was doing it on Hoosier R7s rather than a qualifying-style A7. Over the rest of the weekend he continued learning what the car wanted and where the next limits lived. By Sunday, the questions were less about whether the concept worked and more about tire capacity, brake thermal management, and how much more performance is still buried in the chassis.

Dirk won ST both days, but this weekend was never really about collecting class wins. It was a shakedown, and it gave us a new performance baseline for a car we have only begun to optimize.

There was also a much more important layer to the weekend. Dirkโ€™s dad was visiting from Germany and was able to be there to see the car, experience the paddock, and watch his son properly lean on it. Dirk has not had a huge amount of seat time over the last year and admitted that his physical race fitness still needs rebuilding, but the driving itself was at a very high level.

Fast car. Fast driver. Dad there to see it. That one felt special.

Matt Dawson: Assignment -> Maximum Fun

Matt Dawson stretching the legs of his BMW Z4 M Coupe.

Not every weekend needs to be a crusade for the last tenth.

Matt Dawson brought his BMW Z4 M Coupe with a beautifully straightforward objective: drive the thing, enjoy it, and have fun.

We did have to earn some of that fun. A power-steering fitting began leaking on the test day and cost him some track time while we repaired it. Then Matt introduced an unexpected coaching exercise of his own by showing up with a set of Toyo R888s he wanted to use up.

Those tires offered dramatically less lateral grip than the Hoosiers he normally drives, which meant the technique had to change. We talked about approaching it almost like a wet track: do more of the braking and acceleration with the car straight, reduce the demand for combined grip, and square off corners where appropriate.

It became a useful experiment in adapting the driver to the grip available rather than waiting for the car to feel the way you want it to feel.

Then he bolted the Hoosiers back on and went back to enjoying the Z4. On Sunday he finished third in SPM with a 1:50.921 best lap.

There are worse ways to spend a weekend than learning something useful and repeatedly revving an S54 toward the top of the tach. Man that car sounds good!!!

John and Mat Hennessy: the part you remember

The Hennessysโ€™ #58 Spec E46.

John and Mat Hennessy have been racing with us for years, sharing their #58 Spec E46 across different groups and coming together for the mini enduro.

The car itself has lived a full race-car life and has a list of service work waiting for it, but it kept doing its job this weekend. John had some excellent battles, including time near the front of the Spec E46 fight and exchanges with Ron. Matt ran around his usual pace and got his own share of good racing. The #58 also came home second in ME1 in Saturdayโ€™s mini enduro.

The lap times and positions are nice. They are not the reason this story matters.

Watching a father and son share a race car, split sessions, debrief together, and keep coming back to do this year after year is one of those things that quietly reminds you what the sport can be. Gama told them as much over the weekend: he hopes that when his own kids are older, he gets to share some version of this with them.

A race result lasts until the next race. Getting to do something you love with your kid can become part of a familyโ€™s language.

Harry and Lola Hollander: an unexpected addition to the tent

The Hollandersโ€™ Bastos-liveried #04 PRO3 BMW in traffic.

Harry and Lola Hollander were not originally part of our weekend plan.

We had met them previously while they were finishing novice licensing and exploring where they wanted to race. They ultimately went the PRO3 route and bought the familiar Bastos-liveried #04 BMW. At The Ridge they found themselves needing some last-minute trackside support and asked if we could help.

We were clear about the deal: we had not seen the car before, we did not know its condition, and our technician resource would be shared. But we had capacity to help, so we would tackle one problem at a time and do everything we could to keep them driving.

The car made sure we had problems to tackle.

Despite that, Harry and Lola made essentially the whole weekend, missing only one session, and more importantly they were able to focus enough on their driving to make real progress. Both improved their personal bests by multiple seconds.

Lolaโ€™s Sunday race included a 1:59.453, putting her under the two-minute mark at The Ridge. Harryโ€™s PRO3 best that day was 2:01.236.

Which means the official family leaderboard now says Lola beat Dad by 1.783 seconds.

We will allow her to decide how frequently that fact needs to be mentioned.

For us, this was a good reminder of what track support is supposed to accomplish. The goal is not simply to make a broken thing unbroken. It is to create enough stability around the driver that the weekend can still become productive, enjoyable, and worth remembering.

One last run in the Cayman

The #414 Cayman during what unexpectedly became its final race weekend with Racer on Rails.

Gamaโ€™s assignment for the weekend was supposed to be straightforward: prepare for the upcoming Gridlife GLGT race at Laguna Seca.

We could not get the required series tires in time, so the Cayman went to The Ridge on old Yokohama A052s, both sets date-stamped in 2023 and already carrying plenty of heat cycles. The plan was to re-establish a driver baseline, work on setup, then return the following weekend with reduced power and the correct tires for a much more representative Laguna test.

Friday went well. On the first set of old tires the car felt good and ran in the 1:44 to 1:45 range while we worked through setup changes.

Saturday was stranger. We installed the set that visually looked healthier because it had more tread, only to discover that it was actually even older. The car developed enormous front-end push, especially in the left-hand corners that make up so much of The Ridge. At first we went hunting for setup or mechanical problems. By the end of the day the answer was wonderfully unglamorous: the tires were simply done.

Sunday we went back to the less-dead set, and the car came back underneath Gama immediately.

That afternoon brought the inaugural Porsche & Ginetta Cup race. The Cayman was in an awkward performance island: not quick enough on those tires to fight the 991.2 and 992 Cup cars, but significantly faster than much of the rest of the field. So instead of racing another car, Gama spent the stint racing the lap.

He qualified at 1:45.183. Through the race, he kept finding small pieces, convinced there were still a few tenths scattered around the circuit. On lap eight, the final lap, he put together a 1:45.502, his fastest lap of the race.

He climbed out excited about coming back the following weekend with fresh tires and the next round of changes.

The Cayman sold the next day.

We thought we were establishing a baseline for what came next. It turned out we were putting a period on the end of the Caymanโ€™s chapter with Racer on Rails.

There are worse ways for a race car to say goodbye than setting its best lap of the race on the final lap.

Development is bigger than a result

Looking back, that is what we will remember about Tribute to the Volunteers.

Matt Apeland learned that speed becomes useful when it is repeatable. Montey Mathison lost track time and then immediately found his pace again. Ron Tanemura fought through two different cars trying to strand him and still finished second. Anthony Lo showed race-winning speed even though the result did not survive the final corner. Dirk Groeneveld and the T3 Cayman established an entirely new performance baseline. Matt Dawson used a low-grip tire experiment as an excuse to learn and then went back to having fun. John and Matt Hennessy reminded us why sharing this sport with family matters. Harry and Lola Hollander turned a last-minute support request into personal bests and a little father-daughter scoreboard drama. And the #414 Cayman gave us one final great lap before moving on to its next chapter.

That is driver development to us.

It is not just making the stopwatch smaller. It is engineering, preparation, coaching, racecraft, physical readiness, problem-solving, repetition, reflection, and knowing when the objective for the day is simply to enjoy the machine.

And none of it happens without a community willing to make racing possible.

So one more time: thank you to IRDC, Conference, The Ridge, and especially every volunteer who worked the weekend. We got to do the fun part because you were there.

See you at the track.

โ€” Racer on Rails

If you are building a track or racing program around your own goals, reach us at gofaster@raceronrails.com.

Posted on

SCCA US Majors Tour – Thunderhill 2026 – The Last Stop South

Racer on Rails paddock'ed at Thunderhill Raceway Park

In late April, we wrapped up the final stop of our early-season West Coast racing trip with the 2026 SCCA U.S. Majors Tour at Thunderhill Raceway Park.

This trip started in February at Buttonwillowโ€™s new โ€œThe Circuitโ€ layout, continued through a NASA NorCal weekend at Sonoma Raceway, and finished at Thunderhill before the cars, hauler, and team made the long drive back to the Pacific Northwest.

For anyone newer to club racing, the SCCA U.S. Majors Tour is one of the national-level competition paths within the Sports Car Club of America. It brings together strong regional and national drivers, gives racers a chance to measure themselves against deeper fields, and, for many drivers, forms part of the path toward the SCCA National Championship Runoffs.

Thunderhill is always a fun place to end a trip like this. It has elevation, fast commitment corners, technical braking zones, and enough rhythm changes to keep a driver honest. For this event, we ran the Crows Nest configuration, which adds its own personality to the lap and rewards drivers who can stay patient, committed, and precise.

For Racer on Rails, this weekend had two main drivers:

Gama Aguilar-Gamez in the No. 109 Nissan 370Z, competing in Touring 3

Ron Tanemura in his BMW Spec E46, competing in Touring 3 and STU

On paper, it was another race weekend. In reality, it was exactly the kind of weekend that shows why we love this sport so much. There were clear goals, real progress, hard-earned smiles, and a few memories that will probably get retold in the paddock for a long time.

Why We Were There

Every driver came into Thunderhill with a different mission.

For Gama, the weekend was an important step in the 2026 Runoffs journey. To qualify for the SCCA National Championship Runoffs, drivers need to complete the required number of race weekends and race finishes. After completing two races earlier in the season, Thunderhill became a critical opportunity to add two more finishes and move much closer to locking in the qualification path.

Ron Tanemura never stops looking for opportunity!

But the weekend was not just about checking a box.

The 370Z is still a car we are actively developing. It has shown strong pace, but like most serious race cars, especially one being pushed toward national competitiveness, the work is never really finished. Reliability, braking behavior, tire temperature, chassis balance, setup range, and driver confidence all remain part of the larger development puzzle.

For Ron, the goal was different but just as important.

Ronโ€™s bigger mission this year is driver development. Not just getting faster in one car, at one track, in one situation, but becoming more adaptable, more trusted, and more complete as a driver.

A big part of that is variety. Different tracks. Different race groups. Different cars around him. Different levels of pressure. The long-term target is for him to be the kind of driver who can step into different racing environments, learn quickly, run cleanly, stay close enough on pace, and be trusted by the people around him.

That does not happen by accident.

It happens by putting yourself in new situations, then doing the work to understand them. It happens by learning how to drive a car when it moves around underneath you. It happens by getting comfortable being uncomfortable.

Thunderhill gave Ron exactly that kind of opportunity.

Ronโ€™s Weekend: Raising the Baseline

Ron came into Thunderhill with a very clear goal: build on last year, get more comfortable with the car moving underneath him, and leave with a higher baseline as a driver.

That is one of the things we love about working with Ron. He is not just chasing a result. He is actively working on his craft. He pays attention to what the car is doing, what he is doing, and where the next layer of performance might be hiding.

Thunderhill gave him a perfect environment for that.

Last year, Ronโ€™s best lap at Thunderhill was a 2:06.24. This year, he came close with a 2:06.46. On paper, that means he did not beat his previous personal best. But the timing sheet does not tell the full story.

The bigger win was consistency.

Last year, Ron had one lap in the 2:06 range, one lap in the low 2:07 range, and a handful of laps in the 2:08s. This year, he had five laps in the 2:06s, eight laps in the 2:07s, and seventeen laps in the 2:08s.

That matters.

A single fast lap is fun. A higher baseline is progress.

Ronโ€™s own takeaway from the weekend was that he did not feel quite as โ€œon itโ€ as he did at Sonoma, but he was close enough to feel like his pace is becoming more real and more repeatable. That is exactly the kind of step we want to see from a developing driver.

The biggest learning was around car control.

Post session – getting that Chequered flag for Ron!

When Ron was faster, the car was moving. It was rotating. He was catching it, correcting it, and working with it instead of waiting for the car to feel perfectly settled. During Friday testing, especially in the later sessions, he started getting more comfortable with that feeling. The next challenge is learning how to access that level of commitment earlier in a session, instead of needing several laps to build into it.

That became one of his biggest themes from the weekend: push earlier, trust the car sooner, and learn to drive closer to the limit on demand.

Saturday showed that progress.

In his first Touring 3 qualifying session, Ron was quick and consistent, including a run of laps in the 2:06s before the session ended. Later, in his second qualifying session, he was fast immediately after the restart, showing that the pace was starting to become easier to access.

The races gave him a different kind of experience.

In Touring 3, Ron finished second in class. It was a solid result, but he did not have as much direct class competition around him as he would have liked. At Sonoma, he had more sustained battles, and Thunderhill was a little quieter in that regard.

But the weekend still gave him valuable race craft notes.

He worked on starts. He worked on positioning. He got reminders about following closer before the green, not over-defending Turn 1 when there is an opportunity to open the gap, and using commitment through fast corners to set up passing opportunities later in the lap.

Then Sunday threw the team a curveball.

During Touring 3 qualifying, Ron quickly realized he had lost fourth gear. The transmission needed to be replaced, and the clock was not exactly being generous.

Thankfully, we had a spare transmission available.

The team looked at the schedule and knew it was going to be tight, but there was still a chance to get Ron back out for the STU race later that afternoon.

There was also something special waiting at the end.

At SCCA Majors events, class winners often receive more than a trophy. This event was hosted by the San Francisco Region, and the class-win flags were a cool keepsake from the weekend.

So we made the call: letโ€™s get Ron that flag.

The team jumped on the transmission swap, got the car buttoned up, warmed up, checked over, and ready. Ron made it to the race.

And he delivered.

He finished third overall in Group 2, won STU, and brought home the flag.

But the real story was not just the flag. It was the full arc of the weekend: clear goals, honest self-assessment, measurable progress, a mechanical setback, a team thrash, and one more chance to go race.

That is the kind of weekend that builds a driver.

Gamaโ€™s Weekend: Runoffs Progress and More 370Z Development

For Gama, Thunderhill was about two things: continuing the Runoffs qualification path and continuing to develop the No. 109 Nissan 370Z into a nationally competitive Touring 3 car.

This was only the second full race weekend of the season for the Z, and we came in with some important new learning.

Before the event, Tyler spent time with our partners at Motion Control Suspension to better understand the internal behavior, adjustment range, and service considerations of our three-way dampers with external reservoirs. The details matter, and we came away with more tools in our toolbelt that have helped us start fine tuning the carโ€™s behavior.

For a car like the 370Z, which has shown both pace and some sensitivity around braking behavior and tire temperature management, that kind of learning matters. We have been trying to understand how to make the car more compliant, more consistent, and easier to extract speed from over a full race distance.

Ian Anderson getting the tire pressures dialed in before a session

The goal was not to find one magic adjustment. Race cars rarely work that way.

The goal was to understand the platform better, continue chipping away at reliability concerns, give the driver a car that communicates more clearly, and keep moving the program forward with discipline.

That is the unglamorous part of race car development. It is not always fireworks. Sometimes it is pressure checks, damper notes, tire readings, brake feel, driver feedback, and the quiet little decisions that add up to real progress.

Thunderhill gave us more of that.

On Saturday, Gama finished fifth overall in Group 1 and first in Touring 3, with a best lap of 2:02.789. That result mattered for the points and the Runoffs path, but it also showed that the 370Z had real speed in the class.

On Sunday, the priority was clear: finish the race, keep stacking Runoffs qualification progress, and bring the car home. Gama finished fourth overall and again first in Touring 3, adding another strong finish to the season.

That's another P1 sweep of a race weekend for Ian, Gama, and the Nissan 370z in SCCA Touring 3
That’s another P1 sweep of a race weekend for Ian, Gama, and the Nissan 370z in SCCA Touring 3

Just as importantly, the weekend helped validate some of the direction we are taking with the chassis. The car became easier to work with, more predictable, and more useful as a development platform.

For Gamaโ€™s season, the biggest objective was to continue stacking the race finishes needed for Runoffs qualification. In that sense, the weekend did exactly what it needed to do.

For the car, it gave us more data.

It’s not all roses and daisies when chasing speed. Sometimes you find yourself in the grass…

For the driver, it gave more confidence.

For the team, it gave another reminder that the path to national-level competitiveness is built one weekend, one session, and one decision at a time.

The Bigger Picture

The easy version of a race recap is to talk about qualifying positions, lap times, race results, and trophies.

Those things matter. We care about them. We work hard for them.

But the best weekends usually have another layer.

Ronโ€™s weekend was a perfect example. He hit the goals he came in with, but still left wanting more. That is a good place to be. He raised his baseline, got more comfortable with the car moving, built more race craft notes, identified where the next step is, and still came home with a class win flag after the team thrashed to get him back on track.

Gamaโ€™s weekend was different, but connected. The 370Z program took another step forward, the Runoffs path became more achievable, and we continued learning how to get more out of the platform without losing sight of reliability and drivability.

That is the heart of what Racer on Rails is becoming.

Yes, we prepare race cars. Yes, we support race weekends. Yes, we care deeply about setup, reliability, data, execution, and all the thousand little details that make a race car work.

But ultimately, we are here to help drivers become better drivers.

Sometimes that means building a faster car. Sometimes that means making a car easier to trust. Sometimes that means helping a driver understand what they are feeling. Sometimes that means creating the right environment for a driver to stretch, learn, and come back wanting more.

We want to help people set goals that matter to them, whether that is winning a national championship, earning a Runoffs invite, becoming more comfortable with car control, developing race craft, or simply leaving the track knowing they took a real step forward.

That is why weekends like Thunderhill matter.

P1 both races in SCCA Touring 3 and collecting some hardware before the weather rolled in!

The cars came back north to the Pacific Northwest with more miles on them, more notes in the book, and a few more stories for the paddock. For us, it felt like the right ending to the first chapter of the season.

And for our drivers, it was another reminder that progress in racing rarely arrives as one giant leap.

Most of the time, it shows up as one better corner, one cleaner race, one smarter adjustment, one hard-earned finish, and one flag you almost did not make it back on track to win.

Posted on

June Sprints at Road America โ€“ A Weekend of Grit, Growth, and Podiums

Turn 1 at the start of the Touring 3 race at SCCA Chicago Region June Sprints race!

A few weeks ago, we were at Road America for one of the most iconic events in club racing: the SCCA June Sprints.

There are tracksโ€”and then thereโ€™s Road America. Nestled in the rolling hills of Elkhart Lake, Wisconsin, Road America is one of the most iconic and demanding circuits in North America. At 4.048 miles, itโ€™s one of the longest permanent road courses in the country, with 14 turns that blend technical precision with full-send bravery. Corners like the Kink, the Carousel, and Canada Corner donโ€™t just test your carโ€”they test your commitment. Turn 5 is the โ€œslowestโ€ min-speed corner at a target min-speed of 55-60 mph, depending on the car! That is the โ€œslowestโ€ with the rest of the corners having target min-speed of 65, 80, 90 and 110 mph. ????

And then thereโ€™s the June Sprintsโ€”a race weekend steeped in history. Since 1956, the June Sprints have stood as a cornerstone of American amateur road racing. Itโ€™s a proving ground for national champions and future pros, where every lap carries the weight of decades of racing tradition.

But what truly sets this weekend apart is Elkhart Lake itself. This little town breathes motorsport. Historic restaurants like Siebkens and The Osthoff are filled with old racing photos and stories, and the street signs and commemorative plaques around town proudly mark the original road course from the 1950s, when racing took place on public roads. Itโ€™s a place where history isnโ€™t just rememberedโ€”itโ€™s woven into the landscape.

Just down the road isย RealTime Racing HQ, a name familiar to any longtime fan of World Challenge or Honda racing, SO COOL! And everywhere you look during June Sprints weekend, the town is buzzing with performance carsโ€”from vintage Porsches to modern GT4 machines. Itโ€™s aย car loverโ€™s paradise, and for racers like us, itโ€™s nothing short of heaven.



Big Brains, Big Gains โ€“ Engineering First

Before a single lap was turned, Tyler Campbell was already deep in the work: suspension geometry, brake data, tire modelingโ€”he put in the kind of effort that sets great teams apart. We showed up with one of the most dialed-in testing plans weโ€™ve ever run, and it paid off.

We donโ€™t show up to look cool (or at least we think we try to look cool but look like a bunch of racing and track nerds! ????) and bench race. Weโ€™re here to science the crap out of our race cars and racing!

Gama and Tyler discussing setup options, data collected and how to move forward.
Gama and Tyler discussing setup options, data collected and how to move forward at June Sprints.

Wednesday & Thursday โ€“ Building the Foundation

We rolled in Tuesday night with storms on the radar. Wednesday morning was still wet, but once the track dried, we got to work. We missed the first test session due to the wet track and expected dry conditions through the rest of the race week, but kicked off our structured setup plan with back-to-back sessions focused on testing our hypotheses.

I ran our Spec E46, not because we expected to win overall, but because it gave us a solid, familiar platform to test against elite-level competition (and the Touring 3 Nissan 370Z needed another heart transplant, weโ€™ll get into that more in a future post).

Every change delivered something newโ€”every lap taught us something valuable.

Dave Orem in his BMW Z4M Coupe bombing through Turn 7 at Road America during the 2025 June Sprints
Dave blasting through Turn 7, building speed and confidence lap after lap.

Thursday, we mounted fresh tires and saw a measurable step forward. All signs pointed toward progress, and it gave us confidence heading into the official sessions.


Friday โ€“ Contact, Recovery, and Grit

Morning practice started off wellโ€ฆ until it didnโ€™t.

Dave Orem got dive-bombed in Turn 1. The hit spun him, left him stalled, and another carโ€”unable to avoid himโ€”collected the Z4M hard.

Bryce and Rene hammer away at fixing a nearly fully destroyed front passenger side corner.
Bryce and Rene hammer away at fixing a nearly fully destroyed front passenger side corner. Within 12 hours of total work time, across a couple days and with overnight delivery of parts, Dave and his Z4M Coupe were online and ready for qualifying session 2 and the race weekend!

Thankfully, Dave was okay. And thanks to an incredible community, we pulled off a minor miracle: sourcing every part needed to get him back on track.

Shoutout to Trevor and Wyatt at Motion Control Suspension for building a replacement MCS shock on short notice and getting it to us overnight.


Friday Qualifying โ€“ Almost There

Meanwhile, I was out for qualifying in the E46. Brand new tires. Low Super Tour points meant I was gridded at the back of the T3 field. But we knew we had pace.

Twice, I was on flying laps that wouldโ€™ve moved me to P2 or P3โ€”both times caught in traffic at the carousel and kink. Absolutely destroyed those laps.

Gama Aguilar in the Racer on Rails silver bullet rental Spec E46,

We finished the day P4. Not ideal, but we knew more was coming.


Saturday โ€“ Reset & Rebound

With Daveโ€™s car repaired, he jumped back in for qualifying.

โ€œI didnโ€™t think about the car at all. I was able to focus on finding space and putting down lap times.โ€

Exactly what you want to hear after an incident. He wasnโ€™t fully back to pace yet but showed strong progress.

Dave building confidence in qualifying after the hit that took him out of Q1.

For me, Saturday qualifying locked in P4. Solid lap. Solid position. Not a perfect lap, but enough to put us in contention for Sunday.


Sunday โ€“ Race Day

Daveโ€™s Race

Sunday morning, Dave started deep in mixed-class traffic. Lost a few spots at the start, but once the field spread out, he got to work.

Lap by lap, he found rhythm, overtook competitors, and with just a few laps to goโ€”reset his personal best lap time.

He finished P5 in Touring 3, proud of the recovery but wishing he had the two missed sessions to build more momentum.

Dave making moves through the Sunday main Touring 3 race at the SCCA Chicago Region June Sprints.
Dave making moves through the Sunday main Touring 3 race at the SCCA Chicago Region June Sprints. BMW Z4M Coupe T3 race car.

Gamaโ€™s Race

Hot, humid, and with storms on the radar. The goal? Finish to qualify for the Runoffsโ€”and go for a podium if the opportunity was there.

Turn 1 at the start of the Touring 3 race at SCCA Chicago Region June Sprints race!
Gama looking for a way through at the start of the Touring 3 SCCA Chicago Region June Sprints race.

Great start, dicing for P2 and P3 early. Lap 2 brought a jam up into Turn 3 behind a slowing T2 car. Another T3 car got through; I had to wait. That 3โ€“4 second gap to P3 took several laps to close.

Then it happened.

P3 (another Spec E46) dropped a tire into the dirt under braking. Big wiggle. Lost momentum. I got in the draft, faked right, popped left, held side draft as we bent leftโ€”and completed the pass into Turn 5 with a wheel in or nibbling at the grass.

Gama looking to grow the gap to P4 during the SCCA Chicago Region June Sprints race at Road America in the Racer on Rails Spec E46 rental race car, the Silver Bullet!
Gama looking to grow the gap to P4 during the SCCA Chicago Region June Sprints race at Road America in the Racer on Rails Spec E46 rental race car, the Silver Bullet!

From there? Hit marks. Build gap. Donโ€™t look back.

By the final laps, the lead over P4 was 30+ seconds. P2 and P1 had gotten through the local yellow before me, and that ultimately determined the gap. I brought it home in P3.


???? Watch the Race

Want to see the full race and that battle for the podium?
???? Click here to watch the in-car + SCCA broadcast replay.

YouTube player

What Racing Teaches Us

One of the things I love most about racing is how often weโ€™re proven wrongโ€”and how thatโ€™s a good thing. What we โ€œknowโ€ is always based on the best data and insight weโ€™ve gathered up to that point. The goal isnโ€™t to be right all the timeโ€”itโ€™s to stay curious, stay humble, and keep growing.

And thatโ€™s what we did at Road America.


Letโ€™s Build Your Path in Motorsports

If the way we raceโ€”the way we prepare, develop, and pursue excellenceโ€”resonates with you, letโ€™s talk.

Weโ€™re not just about cars. Weโ€™re about people, progress, and purpose.
And weโ€™d love to help you chase your motorsport goals.

???? Contact us and letโ€™s get started.

Posted on

Race Report 5 & 6: Portland International Raceways – Finally!

And we’re back from the winter 2022 trip with four race weekends under our belt, at new tracks for most of us and ready to come back to familiar ground where nothing would be easier but instead the challenges would be different.

This is post will cover two race weekends as we were at Portland International Raceways April 29 – May 1 for the ICSCC season opening race (Rose City Opener, hosted by Cascade Sports Car Club) and then back again two weeks later, for the SCCA Hoosier Super Tour stop, a part of the US Majors Tour.

Home track advantage

Wait, aren’t most of the people who race at these events, also from the region? For the ICSCC race – absolutely. A little less for the Hoosier Super Tour but that’s not exactly what we mean here. One of the many challenges of each of the stops on the winter trip was that even though we spent countless hours on the simulator training for each track, and it made a massive impact – we were still driving the tracks either for the first time or the first time in the specific race car each of us were driving.

That’s not a BMW or Porsche?!?!? Gama taking the EK Honda Civic with a K24 swap out for it’s maiden race weekend at a known and comfortable space – Portland International Raceways. Photo credit: Doug Berger

That means that at minimum, some material amount of our mental capacity was still being allocated for learning the track. That also means less mental capacity to think about improving on a specific corner or to focus on race craft.

So what happens when you get to a track that you’ve driven hundreds, if not thousands of laps on in real life, simulator and in a variety of conditions and cars? All that occupied mental capacity (and some), comes back and becomes available to be used on another area of improvement. That could be anything from fine tuning a specific setup component for given conditions, exploring different lines/entry speeds into a corner or working on race craft.

It could be anything but the bottom line is that the ability to learn and improve is simply easier because there is one big important thing to think about much less.

So what happened? New Personal Bests All Around!

The ICSCC weekend was held using the non-chicane configuration which further simplifies the course and results in really only ~7 corners total.

Ann in the Porsche Cayman GT4 Clubsport – Finally!!!

Ann in the Porsche Cayman GT4 Clubsport had never driven PIR without a chicane but we had a sense of what her pace would have been from her lap times at Portland last August (2021) with a chicane.

This would also be Ann’s first time driving on Hoosier A7 tires. Results? Ann immediately jumped into the 1:13’s early in the weekend and while she was able to sustain that pace, it looked like there was more low hanging fruit.

One of these is not like the others. Ann Doherty in her Porsche Cayman GT4 Clubsport crashing the GT1 class party.

In the Group 4 race, where she was in the middle of GT1 class cars — You read that correctly, while she was competing in the GT2 class (there were only 2 cars in class that weekend), she was in the front half of the GT1 cars! She put her head down to defend and get as far up the grid as possible and she dropped into the 1:12’s with a scorching 1:12.842. In that race, she would have finished in P3 overall and P3 amongst the GT1 class cars.

And the prior days Group 1 race, when the race started in wet conditions and transitioned to somewhat dry conditions, she was P1 overall and lapped almost every single car except the EK Honda Civic (driven by Gama and more on that below)… twice!

Mega, mega, mega drive by Ann.

Cascade Sports Car Club – Rose City Opener XXX at Portland International Raceway | Ann (#4) and Gama (#309) lapping every single car in the field one time and lapped almost every car a second time before finishing P1 and P2 overall and in SPM class. Photo credit: Doug Berger

When we returned two weeks later for the Hoosier Super Tour event May 13 – 15, the goal was to build on the gains from the first PIR weekend to put it all to work against a stacked GT2 field featuring a Dodge Viper, TA2 Chevy Camaro, a few additional stock cars, nearly tube-frame chassis E46 M3 and even a Porsche 997 Carrera Cup car!

Results? Even more gains and finally, finally – Ann’s 1st SCCA Hoosier Super Tour podium (P2) came on Sunday afternoon’s final race in complete downpour conditions. In dry conditions? Ann improved her personal best lap time by 4.5 seconds from the prior August – incredible progress! In clear air, Ann was competitive for podium contention but in the race, the straight line advantage for the more powerful cars was simply too much for her to keep them behind her for the entire race distance.

So many close podiums in the first 4 races of the year but it finally all came together for Ann in Portland and in the rain.

Simon in the BMW 330ci Spec E46 running in SE46, Touring 3 and SPM

For Simon, we had done 8 Hour Enduro in his car last October and he had done mid-1:19’s here and there and average fast pace was in the high 1:19’s/1:20’s.

Similar to Ann, Simon was immediately on the pace, consistently in the 1:19’s, along with a few other Spec E46 cars but by the end of the weekend, Simon was one of only two Spec E46’s to drop into the 1:18’s and separating himself from the pack of Spec E46’s and closing the gap to Chris Hart, who is an incredibly fast, consistent and national caliber driver. Chris placed P3 in the 2021 SCCA Runoffs in Touring 3 class, past PRO3 champion and spent many years driving stock cars professionally – this guy can wheel!

Simon in the hunt, looking for a way around a turbocharged Subaru WRX STI in the Group 1, SPM race. Photo credit: Doug Berger

During the SCCA Hoosier Super Tour stop, Simon similarly built on his gains from the first weekend and was immediately doing 1:26 lap times – improving his past personal best but on Hoosier Tires versus Toyo Proxes prior. About mid-day on the test day, we did a lead follow session with Simon and I (Gama) with first Simon leading and Gama following – doing mid to low 1:26 lap times and then we switched. Simon was able to follow closely and we both consistently did mid to high 1:25’s – BOOM! New personal bests and now having done lap times that are at the very pointy edge of the Touring 3 and Spec E46 field.

Saturday, Simon qualified on pole for his first Hoosier Super Tour pole position and in wet conditions! During the race, we had dry conditions so at the start Gama got in front of Simon and Chris Hart. About 4-5 laps into the race, Chris had an overheating issue and DNF’ed while Chris, Gama and Simon were running almost nose to tail.

After Chris pulled off track, Simon stuck to the rear of Gama’s bumper and finished P2 for another Hoosier Super Tour podium finish!

Simon’s 4th podium of the year and currently leading the Hoosier Super Tour points standing in Touring 3 (with Dave in 2nd place)

Unfortunately a failing lower ball joint was found in Simon’s car post-race and due to not having press tools at the track, that ended his weekend.

Simon leading a pack of ground pounders through Turn 12 at Portland International Raceways. Photo credit: Doug Berger

Dave skipped the first ICSCC Portland race and drove at Pacific Raceways during our second stop at PIR.

But wait – there were a lot more cars in the Racer on Rails Paddock(s)!

Now that we’re in the thick of the PNW racing season, the SCCA US Majors and Hoosier Super Tour races start to die down (races are still held but mostly out of our region) and we start to dial up the races from our local sanctioning body, the International Conference of Sports Car Clubs (ICSCC).

For the Rose City Opener, we had our group of PRO3 drivers out for their first race of the year and I (Gama) brought out a personal passion project for it’s second race weekend but it’s first with the current power plant – a JDM K24A swap with a JDM Honda Integra Type R transmission and a pretty heavy duty Limited Slip Differential from MFactory.

At a familiar place, the goal with the Honda was to simply get some race mileage on the new chassis, make sure it was running properly, figure out what likes to shake loose and see if we could put down some consistent competitive laps at 80-90% effort. And boy did the Honda deliver!

That little K24A Honda Civic, leading the pack (aside from Ann who had checked out in her Porsche Cayman) to Turn 1 at the start of the SPM Sunday afternoon race. Photo credit: Doug Berger

We worked through some gremlins but with absolutely zero focus on speed, the Honda was consistently doing extremely fast Spec E46 lap times and on Yokohama A052 tires (a really sticky street tire but nothing like a Hoosier tire). There is some serious potential in this car and we’re excited to further develop it over the season. It will be mid June before we see the Honda out again and it should have some new upgrades that will help with reliability and maybe a bit more speed.

Across the rest of the team, every driver improved their personal best lap times with no Chicane at Portland in a 20+ car field and pushing towards the front in PRO3 and a 10+ car field in Spec E46.

What better way to end this race report than with some in-car video of what a very angry Honda 4 cylinder engine based Civic sounds like, bombing around Portland International Raceways at the same speeds that a front running Spec E46 does?

Turn those headphones down a tiny bit and enjoy!

YouTube player
Gama in the #309 K24A Honda Civic Hatchback doing a low 1:18 lap time during Sunday AM qualifying.
Posted on

Race Report 4: Virginia International Raceways SCCA Hoosier Super Tour 2022

The 4th and final stop of the 2022 Southeast Winter trip for the team was historic Virginia International Raceways, located just north of the Virginia/North Carolina border, in Alton, VA.

Before dive into the weekend, below is the map we took from January – April and covered nearly 7k miles and through the winter season across most of the country which resulted in catching the cold and wet weather at nearly each stop. Wow!

4 stops and ~7k miles over 4 months. Hats off to Jordan and Memo who drove our trucks, trailers and cars for every single mile.

Preparing for VIR

Road Atlanta ended up being a primer for VIR for the team. VIR is almost like a bigger Road Atlanta in that it is made up of mostly medium and high speed corners. Proper technique and equally proper commitment are critical to get into a groove and start attacking the lap times.

Just as before, each driver logged multiple hours in the simulator so that we all knew the track by heart and could dive into the test day with a focus on establishing a baseline performance and chipping away at the times.

On average, each driver (and crew member) had nearly 100 laps at VIR on Assetto Corsa with similar or the exact same cars as we were driving in real life.

Thursday Test Day – More Inclement Weather (Massive Thunderstorm Edition)

We all arrived and were fully setup on Wednesday night for the weekend and Thursday morning we awoke to some dew on the grass, dry track and chance of a shower here or there throughout the day. The first session was dry and we all got out and started familiarizing ourselves with the track in real life. Conclusion? The simulator model was pretty spot on!

A few minutes after our session ended, a thunder storm rolled in and another, and another, and another. We had 2, maybe 3 cells roll through and the middle two sessions were shot. Not just because it was raining but torrential downpour and the poor souls who decided to go out (and survived) ended up getting black flags in each session as the conditions were just horrible. Further, the forecast didn’t call for rain during the weekend so using up new rain tires under those circumstances wasn’t a good use of the tires.

Completely unedited and it only took a few minutes of rain before we had water running on the ground.

By the afternoon, the cells had passed and the track started drying. We all went out and while times were slower (transitioning to dry conditions), it was valuable time to further familiarize ourselves with the track.

Learning, Improving and Delivering Results!

The weekend had a similar progression as we’ve had at the other stops but we arguable started off at the highest point to start the weekend. All three drivers came out strong out of the gate and were within striking distance of podium positions, just needed to put our heads down and keep chipping away at the times.

Every session was an opportunity to learn and while unseasonably cold air rolled through on Friday night, everyone steadily chipped away at the times and at worst, were in a mid-pack battle but still within striking distance for a podium.

BMW Spec E46 Touring 3 SCCA
Simon in his Touring 3 Spec E46 managing transitioning conditions.

Below is a look at three of the corners we focused on across most drivers.

Sweet track map of VIR full course with a clear plexiglass on top that makes for great white board discussions about lines, markers and passing zones.

VIR Corner Focus 1: NASCAR Bend (Turn 3)

NASCAR Bend is the first left-hand corner/complex of the lap where it’s a bit of an awkward, somewhat off-camber corner where there isn’t a ton of time to be gained but very easy to over-slow and lose time. It feels a lot like Turn 6 at Portland International where it’s key to maintain minimum speeds and spend as little time as possible in the complex.

None of us really felt like we consistently hit the corner right but we aimed at being on-throttle at the apex, ascending to full throttle and carrying enough speed that the car had no choice but to use all of the exit curbing on the right. Getting out on that curbing then gave us a wider arch for the next left hand corner, which then left us track left to setup the run through the esses.

BMW M240iR in Touring 2 class at VIR NASCAR Bend
Gama in the Racer on Rails #110 BMW M240iR using all the exit curbing coming out of NASCAR Bend at the start of the Sunday race.

VIR Corner Focus 2: Southbend (exit of the Uphill Esses)

Before there is any controversy, yes – the Uphill Esses (Climbing Esses) are a pretty unique experience. There are few tracks in the world where you are flat out in 5th gear (or 6th gear) and you enter a corner section… without lifting. Thanks to the hours each driver spent in the simulator, after the first few laps in dry conditions, we were all able to take them flat but once you have the right line and rhythm, there’s not much more to them. HOWEVER! What you do on the exit of the Esses is something else.

Check out the Sunday Race 3 video in the M240iR and specifically this video is placed on a flying lap where the car gets light at 129mph and while being flat full throttle. (Note – rewind to start to watch the climb from P5 to P3 in Touring 2 class)

YouTube player

First, yes – it is possible to stay flat through the entire uphill essess complex but doing so compromises the entry into Southbend, of which is a high-speed left hand corner where you’re trying to keep your minimum speed above 90mph.

We found in the simulator that under most conditions, that was the trade-off and instead focused on having the car balanced and turned correctly to brush off minimal speed at Southbend and then carrying that speed into Oak Tree.

VIR Corner Focus 3: Oak Tree

Very much wish we could have been here when Oak Tree had the actual tree still standing. It’s an interesting and challenging corner to begin with but having the tree creating a arch across the corner, would have been majestic. But that’s life and we still enjoyed the scenery and challenge of the corner.

Open wheelers/formula cars showing the line through Oak Tree.

While it’s referred to as a single corner, it’s more like two corners in one and it is *not* a slow speed corner. The entry is best when you can brake into the corner and in a straight line. You can also brake less than you initially think, because the entry is uphill so the grip increases, the further into the corner you go. There is a moment of releasing the brake about mid corner, a focus on getting wide to the left to open up the radius of the corner and then attack the apex with full throttle application right at or before the apex.

In recent years, VIR has added extra pavement beyond the traditional FIA exit curbs which means more track and thus the ability (and requirement) to use all of that extra track on exit. Oak Tree leads to the longest straight away, which makes it the most important corner to hit well and consistently. In the BMW M240iR, we were hitting in the low 140-142mph without a draft and up to 145mph with a draft. The Porsche Cayman GT4 Clubsport was consistently hitting 150mph+ before braking for “Rollercoaster”, which was indeed, a roller coaster!

Race Results: Gains and Podiums

Saturday was a tough day for everyone – full course yellows (not caused by any of our drivers) were rampant, despite dry conditions. There were no gains on personal bests and we all found ourselves battling below the pace we each had demonstrated but struggling to get past cars with better straight line speed.

Dave looking for a way past a T3 Mustang at VIR

Sunday, we all hit the reset button and focused on getting solid starts, creating our own track position/space and getting after it.

Touring 3 Race: Dave and Simon both pounced on mistakes by other drivers and picked up a spot individually, putting Simon in P3 and Dave in P7 before a full course yellow came out that eventually ended the race due to an STU car that had gone deep into the tire wall at the end of the back straight away. Driver and car were all okay. Both ended up with their personal best lap times right before the FCY and were it not for the FCY, each felt like they had the rhythm and pace to further improve.

GT2 Race: Ann started in P5 with a mega qualifying effort and quickly jumped into P3 on the first lap with some assertive moves. With a gang of TA2 cars, tube-frame chassis RX7’s and many other ground pounders, her nimble and incredibly impressive under braking, Cayman GT4 Clubsport was under constant attack on the long back and front straight aways but she was able to create distance in the handling sections of the track.

Unfortunately there was a 3 lap long Full Course Yellow which took away the entire gap that she had built up and as soon as the green flag was thrown for the restart, she was back under attack and sitting duck for cars that had nearly a 10mph speed trap advantage.

Ann defended hard but ended up losing two positions by the end to finish in P6 BUT she fired in her fastest lap of the weekend on the final lap of the race.

Touring 2 Race: Gama was once again behind the #110 BMW M240iR for this race and faced similar challenges to the previous races – great under braking, handling but lacking 8-10mph to other BMW’s and 10-14mph to the Porsche’s. It became very clear on the Saturday race that if he wasn’t able to keep them behind them before the end of the back straight (coming off of Oak Tree), he’d be stuck behind them for the rest of the race.

The goal was simple – get a solid start (tough with a turbo car), get positions and keep them behind before T13 (Rollercoaster) and then create a gap in the handling sections.

The start was above average but still nothing compared to the naturally aspirated cars. Fortunately, they left a giant gap going into braking for T1 and was able to recover a lost position under braking. The next two laps (switching to first person mode) I was looking for a gap and specifically coming out of the uphill essess because I had noticed the Porsche’s were struggling to carry speed and get a good exit out of Southbend.

In lap 3 of the race, it happened – 997 Porsche got too sideways on the exit and I pounced, getting by him before braking for Oak Tree.

I was getting better exits out of Oak Tree than the Porsche but by about the middle of the straight away, I was a sitting duck so for one lap, I defended like a lion. Right after exiting the corner, I signaled to the Porsche that he’d have to pass me somewhere else on this one lap as I slowly moved from one side of the track to the other so that I could break a draft he might get (not that the Porsche needed it). He got the message and stayed behind.

From then on, I put my head down and carried as much speed as I could through Hog Pen (final corner sequence of the lap) and onto the front straight. I had created just enough of a gap that I didn’t think he could make a credible move into turn 1, so last second, I moved back to the left to brake at normal spot and line. The Porsche ducked in to out-brake me into Turn 1 but the line was WAY too shallow for braking that late and with the additional speed the Porsche’s carry, so he easily washed out and off-track.

From then on, I put my head down and hammered out two new personal best lap times (in the 2:04’s) and was chipping away and making my way through traffic. Aside from a big mistake, I simply didn’t have the straight line speed to compete for better than P3.

Full course yellow came and my gap had been erased. The following 10-12 minutes were some of the most nerve racking of my life – I was sitting duck on the restart so I’d have to pull some magic out again but luckily, the race ended under FCY and for the first time in my life, I was beyond grateful for that result. P3 in Touring 2 class at Virginia International Raceways and against a fleet of Fall Line Porsche’s and BMW’s – what a weekend!

What’s Next?

We’re a little late in publishing this report but after this we make our way back to the Pacific Northwest to start the regional racing season with races at Portland International Raceways, Pacific Raceways and Spokane County Raceway in May.

VIR was an amazing experience overall and great practice and data gathering for when we return in September for the 2022 SCCA Runoffs.

Posted on

Andy Porterfield Memorial SCCA U.S. Majors @ Auto Club Speedway

Not even a couple weeks into 2021, we kicked off the racing season with a trip to Southern California for our very first SCCA race weekend and a U.S. Majors Tour event at that!

We love the Spec E46 class and series because it’s a national class where these cars can be raced all over the country in a variety of series. In 2019 we did a NASA National Championship run, racing in California at Sonoma and Thunderhill to qualify for the National Championship at Mid-Ohio Sports Car Course. We were all set for a similar campaign and with more cars and the national championships at Utah Motorsports Park but COVID threw a wrench into those plans (and everything else in the world).

With the 2021 NASA National Championships to be held at Daytona International Speedway, we decided to instead participate in the SCCA Run Offs (SCCA’s National Championship) which is set to be held at Indianapolis Motor Speedway. To be able to compete in the Run Offs, you have to qualify by competing in a minimum number of US Majors/Hoosier Super Tour events (minimum 3 weekends and finish minimum of 3 races in the same class) or participate in 4 Divisional race weekends and finish in the top 3 of the divisional points race in that same class.

This race weekend would be the first of our “winter” Southwest road trip, followed by a Hoosier Super Tour event at Circuit of the Americas in February, Buttonwillow in late February and Thunderhill in March. With this “trip” we should have all the races taken cared of to qualify for the Runoffs before the PNW racing season gets going.

New track, trailer and tires

By the time the cars hit the track on Friday mid-day, we had gotten through three new firsts:

  1. New track: This would be a new track for everyone on the team but being able to get some simulator time on iRacing in the Mazda Global MX-5 Cup Car helped us get up to speed on the track and some sense for braking points and a rough setup direction.
  2. New trailer: With a few cars to transport and what is looking like a packed racing year, it was time for us to invest into the shop and buy a larger trailer. This was our inaugural outing in the new truck and trailer. We’ll still be seeing our trusty individual trailers for other weekends but the new trailer made this trip much easier to manage.
  3. New tires: This also was the first time we strapped on Hoosier tires for T3 competition on any of the SE46’s in our fleet. While the Hoosier’s are technically more narrow in diameter 225/45/17 versus the 255/40/17 spec for the Toyo RR’s. We measured them and the Hoosier is still wider than the Toyo RR. ????

Learning a new track and an roval

Having some time on the simulator really helped out and after a couple sessions, each of the three drivers started developing a rhythm and we were able to start focusing on specific sections of the track. While a decent sized track, it ended up being relatively simple. Kind of like Portland International Raceways, it felt like figuring out how to get the first 85-90% came relatively easy but that last 10-15% took a good amount of discipline and intestinal fortitude.

The track is made up of a two chicanes which are similar to the PIR chicane, one very tricky decreasing radius right hander, a deceivingly simple final sector that leads to oval section and longest full throttle sequence and a turn 1 and 2 on the oval that requires a good amount of commitment to stay full throttle the entire time. It wasn’t until after Saturday’s qualifying and race sessions that we were convinced it was possible to stay 100% full throttle through the whole oval and bets were laid out to see who the first one was to stay flat on Sunday AM’s qualifying.

Gama Aguilar in the #209 Full Throttle in the Oval Section

Saturday Podiums and Progress

The story of the day on Saturday was to keep learning and bring back some hardware. With a limited field in T3, podium spots were almost guaranteed but there were other cars from other classes that qualified amongst the T3 runners, which were made up of our fleet of 3 BMW E46’s and the #12 BMW SpecE46 of Brian Ghidinelli.

Racer on Rails customers John Hennessy and Russell Seewald had an incredible battle the entire race where Russell was able to hold off a late race charge from John to hold on for P3 in T3.

Gama Aguilar (person writing this article ????) got behind Brian Ghidinelli, who qualified on pole and stuck behind him for the majority of the race, waiting for an opening to make a pass. About 3/4 of the way through the race there was an opening going into the last chicane of the track. I came out of his draft right before going to brakes, moved into the inside and got side by side. As I started trailing to turn in, I looked at the body language of Brian’s car and it looked like he didn’t see me so I started backing out of the move but he turned in too quickly and we ended up making contact with Brian spinning out.

I made sure the car was still working (it was) and while I thought it was a clean move, I didn’t want any questions or discussions with stewards so I backed off and waited for Brian to catch up. Once he did, I waived him through to give the position back and resume racing. The goal is to qualify for the Runoffs. Winning every race is a goal and would be awesome but that’s not the ultimate goal.

Saturday Race Results: 1. Brian Ghidinelli, 2. Gama Aguilar, 3. Russell Seewald, 4. John Hennessy

Sunday AM Qualifying and Final Race

After getting the bets on the table for who would got flat through the oval first and John Hennessy strapping on some sticker tires, we went out for qualifying. Gama and Russell both went out on scrubbed but still fresh Hoosier A7’s and with qualifying time of 8am PST, the track conditions were going to be near perfect.

Everybody improved across the board, dropping at minimum 1.5 seconds. John Hennessy put in a MEGA lap of 1:52.106, less than 1 tenth of second behind Brian Ghidinelli with a 1:52.048 – both of which broke the previous T3 track record. Gama came in with a 1:52.652 and Russell came in with a 1:54.655.

With the starting grid for Sunday’s race based on fastest lap from all officially timed sessions on Saturday and Sunday so far, we ended up being gridded across multiple cars from other classes.

The start of the race was a bit faster than of us expected as the overall pole setter had us well into 4th gear before the green flag flew. John got caught off guard a bit with that start and missed opportunities to tuck into the inside lane and lost some spots by the time we were braking for the chicane.

Russell took advantage of that and stuck behind John but on the second lap going into braking for the first chicane, he had a spicy downshift into 3rd gear which locked up the rears and sent him on a ride. Fortunately, no walls or bumpers were hurt during the spin. Russell got back on the track, finished the race and made the most of some flat spotted rear tires.

John got into a rhythm but the lost positions at the start created a gap to the P1 and P2 battle that was unfolding.

Gama (err… I) got a couple of positions on the start of the race and was behind Brian by mid-way through lap 1 but an out of class Corvette was getting around me on the big straight aways and getting in the way for the braking zones. It took a couple of laps but eventually created enough space to not have to worry about it.

I started putting my head down to eat away at the gap Brian had created (probably around 3-5 second gap) and around lap 4, a spun out Mazda Rx7 GT2 car almost took me out in the first chicane. Was able to put down some fast laps and eventually, the Rx7 got around me and while it slowed me down a little, it eventually went out of sight and caught up to Brian.

About half-way through the race, the RX7, Brian and I were all bunched up and it became apparent that the RX7 didn’t have the braking or handling performance to hang with us in the corners and while it would motor away on the straights, the lap time gap wasn’t big enough to create separation. It would turn into who would be the last person to have a lap or a sector screwed up by the RX7 and giving the opportunity to the other driver. We both benefited and took hits from managing the RX7 but unfortunately for me, it ended up being on the second to last lap (as I was leading) that the RX7 parked it on the sequence that leads on to the main start/finish straight. I had to lift and adjust my line to not take us both out and by the time I was back on throttle and had cleared the RX7, I looked to my left to take the inside line (and thus make Brian go around me on the outside to overtake), he was already tucked in with some overlap.

This turned into the most exciting sector of the weekend where we went side by side through the entire oval sector for the last lap and I stayed flat for as long as possible to try to keep the position but Brian had the inside line for the chicane and unless he completely over slowed, it would have been near impossible to keep the position by going around him on the outside.

#12 pulling away on the final lap as the RX7 refuses to go away.

From then on, the RX7 hassled me on another two corners which sealed the deal for Brian. Overall, was a great race and incredible time at our first time as a Racer on Rails team, going to a super speedway and roval course.

Sunday Race Results: 1. Brian Ghidinelli, 2. Gama Aguilar, 3. John Hennessy, 4. Russell Seewald

Thank you to everyone at the SCCA Cal Club, Hoosier Tires and all the volunteers who made this race weekend happen without a single issue and in the middle of a pandemic. THANK YOU!

YouTube player

Speed Nerd Bonus Content: What changed over 1 day?

From Saturday to Sunday, the qualifying laps, average race laps and fastest race laps all came down by at least 1.5 seconds. So what happened? Below is a comparison of the fastest race lap time on Saturday versus Sunday. Here’s what we think happened:

  1. More seat time: Saturday was only the third or fifth time any of the RoR drivers had ever driven on the track in real life. Each session would help find more speed.
  2. Staying flat on the oval: Every little bit counts and as we got comfortable with the track, it became clear that you could take it flat every lap and while a little sketchy, it was possible. Just had to believe and trust that it was possible and it appears to have resulted in almost .75 seconds gained before hitting the brakes for the chicane.
  3. Patience on the exit of corners: This is likely tied to #1 but as I understood the track more and more, I started focusing on corner exits – do anything possible to not need to lift or hesitate too much when ascending to full throttle. Still not perfect at all but I think it got much better.
  4. Use that purple crack: The additional grip of these Hoosier A7’s relative to the Toyo RR’s is significant. For example, on sticker tires in the Toyo’s, coming out the hot pits I can drop it into 1st or 2nd gear and light up the rear tires. That was near impossible with the Hoosier tires. I think we got more comfortable with the tires and what they could take under all aspects of a corner. I think we still left grip on the table but that just gives us something to look forward to.
#209 Gama Aguilar Fast Laps from Saturday and Sunday Races

Next up: Circuit of the Americas February 6-7, 2021

Posted on

v1.3 Assetto Corsa Spec E46 Now Available

Today, we’re excited to release another update of the BMW Spec E46 mod car for Assetto Corsa.

There is only one update to the car but it’s an important one, we’ve updated the suspension geometry to be based exactly off a real-world SE46 race car. Below you’ll see that we took measurements of every component of the chassis and suspension geometry down to the millimeter (while we were building a new SE46 race car), so the virtual car could handle as closely to the real-car, as possible.

The end result? Generally the car feels easier to drive and we found an additional .5-1 second almost immediately (after playing with the setup).

All existing owners will get this update and all future customers will get v1.3 moving forward. Let us know what you think!

Get the updated BMW Spec E46 for Assetto Corsa, here!

Check out a lap around Pacific Raceways with the new suspension geometry below!

YouTube player